Exfo MaxTester DSL User Manual download pdf (Page 8)

Introducing the MaxTester DSL Test Set 2

Keypad

³ Power: The button on the lower left side of the unit is used to power the unit on

and off.

³ Arrow Keys navigate the screen to access and modify parameters.

³ Function Keys activate the corresponding on-screen function button.

Battery

The MaxTester DSL is equipped with a Lithium-ion battery.

When fully charged, the battery should provide between 3 and 10 hours of power

depending on different factors such as: type of tests performed, display backlight

level, and connected accessories.

To maximize battery power of the MaxTester DSL:

1. Lower the display backlight level using the application found in Display and

Language in the System settings, when the MaxTester DSL is used under low to

medium light conditions.

2. Disconnect any unused USB or SD accessories.

3. Quit any running tests when the MaxTester is not in use.

4. Whenever possible, put the MaxTester DSL in suspend mode by pressing for

less than 1 second,

5. When not in use, turn the unit off by pressing for at least 4 seconds.

WARNING

³ Recharge the battery using only the MaxTester and with the

battery properly installed in the unit.

³ Never open the battery back panel of the MaxTester without

reading the Replacing the Battery section in this chapter.

Function keys

Home/Help

Stop/Start test

Power

Back

Arrow keys

Enter

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 57 58

No comments

Exfo MaxTester DSL User Manual Page 8